---

Section 4.3 - Supported Devices

The FocusLynx focuser hub currently supports the focusers listed on this page. This device listing can also be found in Appendix A of the FocusLynx Command Reference guide.  Listed after each focuser type is the device type code used by the direct serial command set to represent this focuser. The focusers supported by the FocusLynx are:

• Optec TCF-Lynx 2" - Code OA

• Optec TCF-Lynx 3" - Code OB

• Optec TCF-S 2" with Extended Travel - Code OC

• Optec Fast Focus for Celestron Telescopes - Code OD
  
  
• Optec TCF-S Classic converted - Code OE

• Optec TCF-S3 Classic converted - Code OF

• Optec Gemini (reserved for future use) - Code OG
  
  
• Optec QuickSync FT motor Hi-Torque - Code FA  (equivalent to FeatherTouch HSM motor)
  
  
• Optec QuickSync FT motor Hi-Speed - Code FB  (equivalent to FeatherTouch HSM motor)
  
  
• Optec QuickSync SV motor for StellarVue focusers - Code FC  
  
  
• Optec DirectSync TEC motor for TEC focusers - Code FD
  
  
• Optec driver for Robo-Focus uni-polar motors - Code RA

• Starlight Focuser FTF2008BCR - Code SA (see note below)

• Starlight Focuser FTF2015BCR - Code SB (see note below)

• Starlight Focuser FTF2020BCR - Code SC (see note below)

• Starlight Focuser FTF2025 - Code SD (see note below)

• Starlight Focuser FTF2515B-A - Code SE (see note below)

• Starlight Focuser FTF2525B-A - Code SF (see note below)

• Starlight Focuser FTF2535B-A - Code SG (see note below)

• Starlight Focuser FTF3015B-A - Code SH (see note below)

• Starlight Focuser FTF3025B-A - Code SI (see note below)

• Starlight Focuser FTF3035B-A - Code SJ (see note below)

• Starlight Focuser FTF3515B-A - Code SK (see note below)

• Starlight Focuser FTF3545B-A - Code SL (see note below)

• Starlight Focuser AP27FOC3E - Code SM (see note below)

• Starlight Focuser AP4FOC3E - Code SN (see note below)
  
  
• Starlight FeatherTouch Motor Hi-Speed - Code SO
  
  
• Starlight FeatherTouch Motor Hi-Torque - Code SQ
  
  
• Televue focusers with FeatherTouch pinion - Code TA

Note:  The original Starlight Instruments FTF device types were considered too confusing and have been deprecated.  These device types are no longer available with firmware versions v1.01 and higher.  Instead, device types FA and FB should be specified when using the QuickSync or HSM (Handy Stepper Motor) from FeatherTouch.