Optec Home > Astronomy > Catalog > OAG > #19349
Sagitta
Off-Axis Guider
#19349 - Add-on Motor for Sagitta Off-Axis Guider
Optec engineers designed the Sagitta OAG to provide a solution for remote imagers who require the ability to adjust guide camera focus independently of the imaging camera focus.
Focus Motor for Manual Sagitta OAG
Optec
engineers designed the Sagitta Off-Axis Guider for manual or remote
motorized use. The primary helical focus knob is, in fact, an
anodized 80-tooth gear which allows direct engagement of the #19349
Sagitta motor.
NOTE: Optec's #19340 Sagitta OAG includes this motor. Separate purchase is ONLY required for owners of the manual version #19342 Sagitta wishing to add the motor feature to their Off-Axis Guider.
How to Order:
Contact any Optec dealer, call Toll-Free 1-888-488-0381, email, or visit our ecommerce site: optecinc.us.
Controller Compatibility:
The standard FocusLynx Controller hub can easliy be converted into a Dual-Focus Controller with the addition of the optional Second Stepper Driver board.
- Optec FocusLynx controller,
- Starlight Instruments FocusBoss II controller.
Featuring an easy-to-install board with a double row connector, the Second Stepper Driver pushes directly into the main FocusLynx control board. Full details for the #19533 Secondary Stepper Board are available here. Review the video to see how easy converting your FocusLynx into a Dual Focus controller can be.
Installation Instructions:
Click
here
for the Sagitta Off-Axis Guider Installation instructions
in pdf format - revision 3.
Additional Details and Resources:
Optec
has developed a new shorter 3-inch dovetail to fit the Sagitta and older
MOAG off-axis guiders. See the full
OPTEC-3000-S dovetail
spec sheet for details. Order custom adapters from
Precise Parts.